Rose CrystalView Plus Instrukcja Obsługi Pobierz pdf (Strona 23)

CRYSTALVIEW PLUS INSTALLATION AND OPERATIONS MANUAL

Connecting to a Rose KVM switch

The CrystalView Plus can further enhance your system by connecting the

local unit to a Rose KVM switch. This provides remote access to as many

as 1,000 computers (depending on the type of KVM switch and topology

configuration).

Figure 9. CrystalView Plus to a KVM switch

Applying power

(All models)

Plug in the power adapter to a 100/240-volt source and to the power

connector on the Remote Unit. Only use the power adapter provided

with the CrystalView Plus. Boot up the connected CPU and wait for it to

completely boot-up. The Local Units power is supplied from the CPUs

keyboard port. If additional power is required at the local unit due to

extended cable lengths or only passing video through the CrystalView

Plus, connect the optional

+5V DC power adapter to the local units +5V DC power jack.

The video image quality may be poor at this point due to cable lengths,

types, or patch panels. Video adjustments are performed from the

remote unit using simple keyboard commands.

Table 1 shows the keyboard commands and key sequences used to

initiate the command.

CATx CABLE

OCAL REMOTE

KVM SWITCH

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

Brak uwag

Rose CrystalView Plus Instrukcja Obsługi Strona 23